DIY Crafts · Home Decor

DIY Hanging Floral Orbs: Beautiful Wedding and Seasonal Decor

I’m seeing amazing hanging floral orbs everywhere these days, from stylish front porches to glamorous wedding receptions. What a unique, eye-catching, and beautiful way to display your greenery and flower arrangements at your event or in your home!

These hanging decorations can be used in any way your imagination can think up. In fact, the floral orb that inspired my design was a fall decoration containing mini-pumpkins and eucalyptus. The great thing about these is everything is attached to a piece of floral foam, and everything can be re-done again and again. I plan to use my decorative orbs as a seasonal decoration, with fall flowers right now, pine boughs at Christmas, and so on. 

For an added dimension, I think it would be amazing to add wired fairy lights, and I’m going to give that a try at Christmastime. 

These floral orbs make fantastic wedding decor also. The DIY project is easy on your budget too!

Thanks for checking out my tutorial today! Use coupon code TAKE25 to receive $25 off your order of $200 or more at Kate Aspen!

Kate Aspen - For all you celebrate

Okay, if you’re ready to give these gorgeous decorations a try, let’s get to it!

Post contains affiliate links. Please see about page for full info. 🙂

Supplies:

2 double ring plant stakes for tomatoes/peonies/large plants

16 gauge wire and sturdy pliers for bending and cutting

Copper spray paint

Light pink spray paint

½ inch wide natural rope for hanger (6 feet)

⅛ inch sheer ribbon 

Floral foam brick- 9 by 4 by 3, make sure to get wet foam if using real flowers and greens.

20 greening pins

Package of Spanish moss

Flowers, greens, and decorations

Here’s how you build the orbs. We made one large 18 inch orb and a smaller 10 inch orb using the plant stakes. 

Step 1: Disassemble the rings and stakes from each other. Depending on how your stakes are put together, it can be a bit of a brain-teaser getting them apart, but they are separate pieces. 

Step 2: Cut 2 24 inch segments of your 16 gauge wire

Step 3: Taking the four large rings from the plant stakes, put them together so they form an orb with equidistant segments, like an orange. 

Step 4: Holding your rings steady in the way you would like them to be for the finished product, pick up a piece of wire. Fasten one end of the wire onto the hoops by wrapping it on with the pliers. .  Use your pliers to take the wire up through segment 1 and down through segment 5 (see diagram). Weave the wire up through segment 6 and down through 2, up through 3 and down through 7, up through 8 and down through 4. 

Step 5: Wrap the wire around the bottom, and tuck in any sharp edges with the pliers. Repeat the same weaving process with the second piece of wire at the other end of the orb.

NOTE: We made the smaller orb using the garden stakes that came with the hoops. They needed to be bent into a circular form first.

Step 6: Spray paint the entire orb. I painted mine with a coat of light pink and a very light coat of copper over top. This gave the orb a rose-gold to copper look. You could pick whatever color goes with your event or look. 

Step 7: Cut off a piece of floral foam from your block. I used ¾ of a block for the large orb and ¼ for the small orb. 

Step 8: Attach the piece of foam to the bottom inside of the orb using 10 greening pins. Hold the foam in place and poke the pins up from the bottom, making sure to anchor the foam to the orb frame.The advantage to attaching the foam this way instead of gluing is that you can remove the foam easily to replace it or to use the orb for something else, like lighting it up with fairy lights. 

Step 9: Attach the rope for hanging. Our larger orb started with 3 feet of rope. I love the natural rope with the rosy metal. It gives the project a nice warm feel that’s really on-trend right now. We did an eye splice on both ends of our three-strand rope to give the rope a hanger and a decorative touch. You can see how to do that here, or you could hang the orb by simply knotting the rope to the top. I tied the looped rope to the orb using a tiny sheer bow. 

Step 10: Using a hot glue gun, glue Spanish moss over top of the floral foam to cover it.

Step 11: Add floral elements. I started with a base of seeded eucalyptus and left some drape down. I added cream color roses for a simple and elegant display. 

The orbs look great in so many different ways. I had fun playing around with a few different elements and created a pink and burgundy look. The flowers used in this arrangement are sweetheart roses, hydrangea, and sedum. 

It’s hard to believe these flowery orbs started out as tomato stakes!

I hope you’ll give this a try and post a photo!

The orb is filled with eucalyptus and cream roses
A package of two double ring plant stakes
The four rings separated from the stakes
wire and pliers
wire woven through the spokes to hold the orb in place
diagram for wiring the orb
spray painting the orbs
attach rope to the top for hanging
attach foam to the orb with greening pins
hot glue Spanish moss to the floral foam
add eucalyptus by poking stems into foam.
add flowers of your choice

Thanks for checking out my blog today! Use coupon code TAKE25 to receive $25 off your order of $200 or more at Kate Aspen!

Kate Aspen - For all you celebrate

Have a beautiful day, and try something creative 🙂

3 thoughts on “DIY Hanging Floral Orbs: Beautiful Wedding and Seasonal Decor

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s