Isn’t there something so fun and festive about a little bit of jingle in Christmas decor? I’ve been seeing a ton of fabulous felt Christmas ornaments this year on pinterest and in online shops, so I wanted to try making a few myself! I plan to make and post some other DIY felt projects over the holidays, so I hope you’ll plan to stop back!
This fun reindeer garland banner was so easy! The hardest part was cutting out the tiny antlers on each deer. I don’t think any two are exactly identical, but I think they’re close enough. I really like the combination of the rusty jingle bells and the silky tassels on this garland. After completing it, I am displaying the garland across my firplace mantle this year with some other woodsy decor, and I’m really happy with it. The project was fun, and I have ample supplies left to make more banners with the felt, cord, and bells I bought.
Okay, if you want to give this little project a try, here’s how!
Supplies:
(The supply list contains affiliate links. These are the materials I used, and they worked well for this project.)
Thin braided rope or other thin twine of your choice, at least 10 feet long
Felt in shades of brown. I bought this inexpensive variety pack from Amazon and used 3 sheets of the felt for this project.
Rusted jingle bells (or other color if you prefer)
Silky tassels. I bought the craft pack from Amazon and plan to use the rest for other projects.
Hot melt glue gun
STEP 1: Print out the reindeer graphic (below) and cut out the pattern. Other patterns are included that I plan to use for more felt projects.
STEP 2: Pin the reindeer pattern to a piece of felt, making sure to stay on one corner to minimize waste. Using the felt pack I bought from Amazon, I was able to cut two deer from each one piece of felt.
STEP 3: Cut out six deer (or more if you want a longer garland) from your color choice of felt. I used two shades of brown and a camel color. Small sharp scissors work well to cut out the small details.
STEP 4: Lay out the twine on a long table or counter. You will need a longer piece of string than what you hope to have for the finished project. Tying each bell in will take some of the length. You will also want 12 inches or more on each end so the banner can easily be attached wherever you choose.
STEP 5: Beginning at one end, measure off 18 inches and tie on one jingle bell at that spot. Make a mark (using a subtle color marker) 8 inches from the first jingle bell. Tie the second in that spot. Repeat the same process every eight inches until you have enough bells attached for the number of deer you plan to use. For my 6 deer, I needed seven bells each 8 inches apart.
STEP 6: Lay out some newspaper or something glue safe and put the left-most section (between the first two bells) on it. Heat up your glue gun. Measure four inches between the two bells. Put some glue on one side of the section of string where the deer will attach, about 3.5 inches. Place the deer on the glue. Pick up the section of string and deer to let it dry so that it doesn’t accidentally get stuck to the paper. Continue until all deer are securely attached. Check the back side of the deer to make sure all of them are glued on along their full length.
STEP 7: Choose the tassels you want to use on your garland. From the package I bought, I chose gray, ivory, and brown because I wanted my garland to have a woodsy look. Cut the loops down so they they are at a good length to glue, about half an inch. Glue the tassels on the back with the hot glue gun. The tassels will keep the deer hanging in the right direction.
That’s it! Super easy and original Christmas decor for your home!
Have a beautiful day and try something creative! 🙂
Blue Willow Lane 